CNET CNWR-811P - Manual (Page 20)

Configuration
17
Wireless Configuration
The CNWR-811P settings must match the other Wireless stations. An example Wireless screen
is shown below.
Figure 10: Wireless Screen
Data – Wireless Screen
Configuration
Regulatory
Domain It is illegal to use this device in any location outside of the regulatory
domain.
Station name This is the same as the Device (Host) Name on the WAN screen. On your
PC, some Wireless status screens may display this name as the Access
Point in use.
SSID
(ESSID) To communicate, all Wireless stations MUST use the same SSID/ESSID.
The default value is default
Note! The SSID is case sensitive.