CNET CNWR-811P - Manual (Page 16)

Configuration
13
DISABLED, and the existing DHCP server must be re-configured. See
Chapter 5 for further details.
Start IP Ad-
dress
Finish IP
Address The IP Start Address and IP Finish Address fields set the values used by
the DHCP server.
This range also determines the number of DHCP clients supported.
(Maximum 253.)
DNS (Domain Name Server)
DNS (Domain
Name Server)
IP Addresses If your ISP uses a “Dynamic IP Address”, then the DNS is also provided
dynamically. Any DNS values entered here will be used instead of the
dynamically-obtained DNS addresses.
If using a “Fixed IP Address”, your ISP should recommend a DNS.
Multiple DNS entries should be entered in the order you want them
accessed. (The first available DNS will be used.)
Routing Table
Routing Table
If your LAN contains an existing Router or Routers, refer to Chapter 6 -
Routing.