CycleOps PowerTap - Manual (Page 13)

2) Hold [MODE] or [SELECT] - a single button press and hold of either [MODE] or
[SELECT] for 2 sec.
3) Press [MODE] and [SELECT] - simultaneously press and release of both [MODE] and
[SELECT].
4) Hold [MODE] and [SELECT] - simultaneously press and hold both [MODE] and
[SELECT] for 2 sec. NOTE: Continuing to hold longer than 2 sec. will clear all data.
5) Extended Hold [MODE] and [SELECT] - simultaneously press and hold of both
[MODE] and [SELECT] for greater than 5 sec.
POWER CONSERVATION
The computer and hub have power saving features to prolong battery life. The computer powers
down the display after four (4) minutes of inactivity. Press either [MODE] or [SELECT] to activate
the display. Similarly, the hub powers down after two (2) minutes of inactivity. The transmission
icon will not be visible when the hub is asleep. To wake the hub spin the wheel and verify the
transmission icon is illuminated.
13