CycleOps PowerTap - Manual (Page 24)

COMPUTER SETUP 1
This setup menu includes: time of day, date, storage rate, wheel circumference, units of measure,
odometer. NOTE: You are unable to move back to a previously viewed settings. You must restart
setup 1 to make corrections.
1) From the computer setup main menu press [SELECT] and scroll until the
number one (1) is flashing. Press [MODE] to enter setup mode.
2) Press [SELECT] to toggle between a 12 or 24 hour clock. Press [MODE] to
save.
3) Press [SELECT] to toggle between AM (A) or PM (P). Press [MODE] to
save.
4) Press [SELECT] to toggle through digit values to set hours in time of day.
Press [MODE] to save.
24
Std
t
12
Std
t
Std
p
t
12:00
p
Set
E
t
d