CycleOps PowerTap - Manual (Page 25)

5) Press [SELECT] to toggle through digit values to set minutes in time of
day. Press [MODE] to save.
6) Press [SELECT] to toggle through digit values to set year, month, and
date. Press [MODE] to save.
7) Press [SELECT] to toggle through storage rate values (1, 2, 5, 10, and 30
seconds). Press [MODE] to save. NOTE: Different storage rates yield differ-
ent amounts of total storage time. Changes to the storage rate does not
effect display information. Refer to TABLE 3 for appropriate storage rate.
TABLE 3 - PowerTap SL Storage Rate
8) Press [SELECT] to toggle through digit values to set the wheel circumfer-
ence. Press [MODE] to save. Refer to TABLE 4 for common tire information.
NOTE: For the most accurate reading perform a roll out measurement
(mm) of the rear wheel.
25
Std
03
0 1 - 0 1
c
Year
Day Month
Std
r
e
c
5
Std
1
CI r
2096