CycleOps PowerTap - Manual (Page 28)

6) Press [SELECT] then [MODE] to reset default settings. Press [MODE] to
save changes.
COMPUTER SETUP 3
This setup menu includes: zero readings for power, speed, and cadence. NOTE: You are unable to
move back to a previously viewed setting. You must restart setup 3 to make corrections. NOTE:
These settings are useful for determining you average when pedaling only and do not effect the
data that is stored for download.
1) Press [SELECT] to toggle between yes and no for zeros included in aver-
age of watts. Press [MODE] to save.
2) Press [SELECT] to toggle between yes and no for zeros included in aver-
age of speed. Press [MODE] to save.
3) Press [SELECT] to toggle between yes and no for zeros included in aver-
age of cadence. Press [MODE] to save.
4) Press [SELECT] to toggle between yes and no for auto-zero function.
Normally leave at yes. NOTE: Auto-zero is used for track bike use where
large negative torque may be present. Hub modification to fixed hear is
necessary.
28
PRO
3
0’ s
YES
AV WATTS
PRO
0’ s
AV MI
YES
PRO
3
c av
0’ s
YES
PRO
3
t
YES