To stop recording, To check the order of the programmed track numbers, 3 p 01 – Aiwa Z-VR55 User Manual

Page 15: To clear the edit program

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

In the Programmed edit recording function the tracks can be

programmed while checking the remaining time on each side of

the tape as the tracks are programmed.

1

Insert the tape into Deck 1.

Insert the tape with the side to be recorded on first facing out

from the unit, and wind up the tape with

2

Press CD and load the disc(s).

3

Press EDIT/CIHECK twice.

“EDIT” and “PRGM” are displayed.

U r K b I ■

• When “Al” is displayed, press EDIT/CHECK again.

4

Press numbered buttons on the remote control

to designate the tape length.

10 to 99 minutes can be specified.

• -♦«I, ►► or MULTI JOG are also available to designate

the tape length.

Tape side A Maximum recording

Tape length

(front side) time for side A

6

Repeat step 5 for the rest of the tracks for side o

A.

S

A track whose playing time is longer than the remaining time
cannot be programmed.

3

,

7

,

8,9

4

... 30== 00

8

Press EDIT/CHECK to select side A and press

• on Deck 1.

l:tJH flashes for 10 seconds, and then CD play and recording

of edited tracks for the first side start simultaneously. When

the end of the tape is reached. Deck 1 enters the recording

stop mode. After entering the recording-stop mode, go to
step 9.

9

Press EDIT/CHECK for recording of the second

side.

“B” is displayed.

10

Turn over the tape in Deck 1 and press • to start

recording.

Recording starts.

To stop recording

Press

M/±.

on Deck 1.

simultaneously.

Recording and CD play stop

To check the order of the programmed track numbers

Before recording, press EDIT/CHECK on the remote control to

select side A or B, and press ◄◄ or ►► repeatedly.

Disc number Program number

3 P..01

a
tc

o

o

7 Press EDIT/CHECK to select side Band program

¡2

the tracks for side B.

W

Tape side B (reverse side)

Press DIRECT, then press one of the numbered

buttons 1 to 5 within 3 seconds to select a disc.
Then, press numbered buttons 0-9 and +10 on
the remote control to program a track.

Example: To select the 10th track of disc 2, press DIRECT

and 12, then press+10 and 0.

Selected disc

number

Program number Remaining time on side A

e>

Track number Programmed track numbers

To change the program of each side

Press EDIT/CHECK on the remote control to select side A or B,

and press ICLEAR to clear the program on the selected side.
Then program tracks again.

To clear the edit program

Press ■ CLEAR twice in stop mode so that “EDIT” disappears

on the display.

Up to 30 tracks can be programmed from any of the inserted

discs.

Selected track numiber

Programmed track number

ENGLISH

1 4

Advertising