Aiwa Z-VR55 - Manual (Page 23)

Speaker system SX-ZR55
Main unit CX-ZVR55
FM tuner section
Tuning range
Usable sensitivity (IMF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Power output
Total harmonic distortion
Inputs
Outputs
Cassette deck section
Track format
Frequency response
Signal-to-noise ratio
Recording system
Heads
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
350 pV/m
Loop antenna
Front
50 W + 50 W (50 Hz - 20 kHz, THD
less than 1 %, 6 ohms)
Rear (Surround)
20 W + 20 W (50 Hz - 20 kHz, THD
less than 1 %, 8 ohms)
Center
20 W (50 Hz - 20 kHz, THD less
than 1 %, 8 ohms)
0.05 % (25 W, 1 kHz, 6 ohms, DIN
AUDIO)
VIDEO/AUX/PHONO IN: 500 mV
5.1CH INPUT:
FRONT: 500 mV
REAR: 300 mV
CENTER: 300 mV .
SUB WOOFER: 500 mV
CD DIGITAL OUT (OPTICAL)
SUB WOOFER: 1 V
SPEAKERS: accept speakers of 6
ohms or more
SURROUND SPEAKERS: accept
speakers of 8-16 ohms
CENTER SPEAKER: accepts
speakers of 8 ohms or more
PHONES (stereo jack): accepts
headphones of 32 ohms or more
4 tracks, 2 channels stereo
50 Hz - 10000 Hz
45 dB (Normal tape peak level,
above 400 Hz)
AC bias
Deck 1: Recording/playback head
X 1, erase head x 1
Deck 2: Playback head x 1
Compact disc player section
Laser
D-A converter
Signal-to-noise ratio
Harmonic distortion
Wow and flutter
Semiconductor laser {\ - 780 nm)
1 bit dual
85 dB (1 kHz, 0 dB)
0.05 % (1 kHz, 0 dB)
Unmeasurable
Cabinet type
Speakers
Impedance
Output sound pressure level
Dimensions (W x H x D)
Weight
3 way, bass reflex
Woofer:
170 mm (6 % in.) cone type
Tweeter:
60 mm (2 Vs in.) cone type
Super tweeter:
20 mm ('Vie in.) ceramic type
6 ohms
87dB/W/m
280x444x272 mm(11
Ve x
17 V 2X 10 % in.)
4.5 kg (9 Ibs. 15 oz.)
Jl
<
K
u
z
IH
(9
Specifications and external appearance are subject to change without
notice.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
DOLBY PRO LOGIC
Manufactured under license from Dolby Laboratories Licensing
Corporation.
“DOLBY”, the double-D symbol □□ and “PRO LOGIC” are
trademarks of Dolby Laboratories Licensing Corporation.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures;
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user's
right or authority to operate this product.
General
Power requirements
Power consumption
Dimensions of main unit
(W X H X D)
Weight of main unit
120 VAC, 60 Hz
150 W
360 X 394.5 x 381 mm (14 'A x
15 Vs X 15 in.)
9 kg (19 lb. 13 oz.)
ENGLISH
22