Echelon i.LON 600 LonWorks/IP Server - Manual (Page 109)

Section 3: Appendixes
Creating a L
ON
W
ORKS
/IP Channel
Creating a L ON W ORKS /IP channel involves configuring each L ON W ORKS /IP device that
will be on the channel and informing the Configuration Server of all L ON W ORKS /IP
devices on the channel. A L ON W ORKS /IP device can be an i.LON 600 or a PC running
LNS 3.0 or better. To create a L ON W ORKS /IP channel, follow these steps:
1. Set the IP address, subnet mask, and default gateway for all i.LON 600s
using the i.LON web interface, as described in Chapter 4.
2. Ensure that the Configuration Server PC can communicate with each i.LON
600 or the LNS 3.0 PC.
3. If the L ON W ORKS /IP channel will contain only i.LON 600 devices, skip to
Step 7. If the L ON W ORKS /IP channel will contain one or more PCs running
LNS 3.0 or later, select Start/Settings/Control Panel on your PC and run the
L
ON W ORKS /IP Channels control panel. This control panel appears in Figure
48 .
Figure 48. L ON W ORKS /IP Channels Dialog Box
4. Click the Add button to add a L ON W ORKS /IP interface to the PC. The
dialog shown in Figure 49 appears:
i.LON 600 User’s Guide 101