Echelon i.LON 600 LonWorks/IP Server - Manual (Page 33)

Section 1: Setting Up and Using the i.LON 600 Internet Server
IP Address Static IP address used by the i.LON 600 if Manually Configure IP Settings is set. The
default value is 192.168.1.222. Contact your network administrator for a static IP
address.
Subnet Mask Subnet mask used by the i.LON 600 if Manually Configure IP Settings is set. By
default, this value is 255.255.255.0.
Default Gateway Gateway used by the i.LON 600 if Manually Configure IP Settings is set. By default,
this value is 192.168.1.222.
Host Name The TCP/IP host name of the i.LON 600.
By default, the host name is iLON600. The URL of the i.LON 600 is Hostname.DNS
Suffix (i.e. if Hostname is set to ilon600Alpha) and Domain Suffix is set to
Echelon.com, the URL will be ilon600Alpha.Echelon.com.
Valid characters are numbers, letters, and the hyphen (‘-’) character. By default, this
value is set to iLON600. If you change this value, you must reboot the i.LON 600 for
the change to take effect. This field has a maximum length of 19 characters.
Web server port Port used by the i.LON 600’s web server. The default is the standard web server port
number (80). If set to a value other than 80, you need to specify the port number in
your browser (e.g. 192.168.1.222:8080) after rebooting the i.LON 600.
FTP server port Port used by the i.LON 600’s FTP server. The default is the standard FTP server port
number (21).
Date and local time This allows you to manually change the time settings for the i.LON 600. Changing the
time settings on your i.LON 600 will not affect the time settings of the Configuration
Server. Note: If SNTP servers are not defined, changing this value can cause the
router to not work properly.
3. Click Submit to save the changes you made to this Web page. Note
that all fields marked with an asterisk require a reboot before the new
values take effect. Click Reset to leave all fields unchanged. Click
Help on the Web page for more information about the fields on this
screen.
Setting the LonWorks/IP Port
The default port setting for the i.LON 600 is 1628. You can set your i.LON 600 to reside
on any port you wish. See www.iana.org for information on port guidelines or if you
want to reserve a special port for your i.LON 600.
To specify a new port for your i.LON 600, follow the below steps:
1. Click LonWorks from the Setup Web page menu. The below screen
appears.
i.LON 600 User’s Guide 25