Echelon i.LON 600 LonWorks/IP Server - Manual (Page 50)

Section 1: Setting Up and Using the i.LON 600 L ON W ORKS /IP Server
Verify that you can ping the Configuration Server PC or members
of the L
ON W ORKS /IP channel using the Windows Command
Prompt.
The i.LON 600 on the
L
ON W ORKS /IP channel
pings successfully, but
will not commission.
Address translation may
take place somewhere
between the two devices.
The router application
does not exist. Make sure that the IP address of the target i.LON 600 device,
determined using the Console Application show command,
matches the IP address defined for it in the Configuration Server.
Determine if the router application exists by using the listapp
command in the Console Application. Create the router app if it
does not exist.
42 Creating a L ON W ORKS /IP Channel