Echelon i.LON 600 LonWorks/IP Server - Manual (Page 15)

Section 1: Setting Up and Using the i.LON 600 Internet Server
i.LON 600 Mounting Options
!
CAUTION
The high-voltage models (72601 and 72602) of the i.LON 600 are intended to be
mounted inside of a suitable, safety-agency approved enclosure that is mounted in a
restricted access area. High-voltage wiring must be performed only by a qualified service
person.
The i.LON 600 mounts to a 35mm × 7.5mm or 35mm × 15mm DIN rail. The rear of the
i.LON 600 enclosure contains a spring-loaded DIN rail lock, which securely attaches the
DIN rail onto a permanent fixture. To release the enclosure from the DIN rail, insert a
flathead screwdriver into the DIN rail locking tab and gently pull the tab down and away
from the enclosure.
The following diagram shows the dimensions of the i.LON 600. All units are in
millimeters:
Figure 2. i.LON 600 Dimensions
i.LON 600 User’s Guide 7