Labconco PuriCare Vertical Flow Stations 3830020 - Manual (Page 33)

29
Product Service 1-800-522-7658
Chapter 6: Maintaining Your PuriCare
4. Replace the prefilter elements, ensuring the air flow
direction arrow on the prefilter frame points down.
Changing the Fluorescent Lamp:
1. Unplug the station.
2. Swing up the sash.
3. Remove the fluorescent lamp by rotating it 90
degrees and pulling it straight down and out of its
sockets.
3. Install the new lamp by reversing the removal
procedure.
Resetting a Circuit Breaker:
To reset any of the circuit breakers located on the back
of the unit near the power cord outlet, depress the white
button until it sets.
Figure 6-2