Labconco PuriCare Vertical Flow Stations 3830020 - Manual (Page 40)

36
Product Service 1-800-522-7658
Chapter 6: Maintaining Your PuriCare
Impeller and Motor/Blower
Maintenance and
Replacement
The motor/blower should be serviced
by a qualified certification technician.
The stations blower motor and
impeller bearings are sealed and
require no lubrication. DO NOT
attempt to lubricate them.
To replace an Impeller:
1. Unplug the unit.
2. Remove the two upper prefilters as described earlier
in this chapter.
3. Remove the five screws that secure the upper rear
panel as shown in Figure 6-5.
4. Carefully swing the upper rear panel forward.
)
Figure 6-6