Laerdal VitalsBridge - Manual (Page 23)

VitalsBridge Directions for Use
22
rev. B.7 PN 10229
When using IBP, all waveforms are not required to for the VitalsBridge to function. Unused IBP ports on
the VitalsBridge may be left unconnected.
Temperature
The VitalsBridge simulates the output of YSI 400 compatible temperature transducers. The temperature
cable is a short white cable that consists of a short RJ-11 connector on one end, which connects to the
VitalsBridge. The other end of the cable is a transducer-style connector, which connects to the
temperature patient monitor cable. Two temperature cables are supplied with the VitalsBridge. T
1
simulates the temperature in the blood, and T
2
simulates Tperi.