Invasive blood pressure offset, Vitalsbridge directions for use – Laerdal VitalsBridge User Manual
Page 33
Advertising
VitalsBridge Directions for Use
32
rev. B.7
PN 10229
Step 1: To bring up the ABP Flat Line option in the Instructor Application, click on the IBP waveform (not
the number). Then check “Flatline” and click on the “Apply” button.
Step 2: Zero the pressure on the patient monitor. Verify that the zero value has succeeded on the
patient monitor.
Step 3: Uncheck the “Flatline” option and click “Apply”. Click “OK” to close the “Flat Line” dialog
window.
Advertising