Laerdal VitalsBridge - Manual (Page 7)

VitalsBridge Directions for Use
6
rev. B.7 PN 10229
Requirements Checklists
Checklist of Included Cables and Accessories:
Please verify the following has been included in your shipment; all of the following cables and
accessories are REQUIRED to properly operate the VitalsBridge. If you are missing any of these items, or
they are damaged, please contact Laerdal for replacements.
1. VitalsBridge power supply, 24V, with wall plug.
2. CO
2
Regulator with mounting bracket.
3. Non-Invasive blood pressure tubing (2, one with green fitting, one with red fitting).
4. Invasive blood pressure transducer cable (3 RJ11 cables, connects from VitalsBridge to monitor’s
blood pressure cable(s)).
5. Temperature transducer cable (2, connects from VitalsBridge to monitor’s temperature
cable(s)).
6. Respiration via ECG cable (connects from VitalsBridge to manikin).
7. SpO
2
Extension Cable (connects from VitalsBridge to manikin).
8. Installation software CD.
9. These directions for use.
Checklist of Required Cables and Accessories Not Included (Must be Purchased
Separately from Laerdal)
1. Non-Invasive Blood Pressure Cuff Kit.
2. Invasive Blood Pressure Monitor Cables.
Computer and Software Requirements
1. Windows Operating System.
2. SimMan3G Instructor Application Software.
3. Ethernet (LAN) or Wireless (WLAN) Communication Capability.
4. VitalsBridge Software (Included on Installation Software CD).
Additional Requirements
1. VitalsBridge Device.
2. SimMan3G manikin.
3. Commercially Available Vital Signs Monitor.
4. AC Power Source (i.e. a wall outlet).
5. Source of Compressed CO
2
(either a disposable cartridge for use with included regulator, or
another external source).