Respiration impedance via electrocardiogram (ecg) – Laerdal VitalsBridge User Manual
Page 24
Advertising
VitalsBridge Directions for Use
23
rev. B.7
PN 10229
Respiration Impedance via Electrocardiogram (ECG)
This connection is utilized with a cable plugged into a connector located on the manikin’s neck.
The other end of the cable plugs into the VitalsBridge.
Once connected, the patient monitor will display the respiration rate and ECG information. Note: a three
lead ECG is recommended with the patient monitor and the SimMan 3G for respiration impedance
simulation.
Advertising