Parr Instrument 6400 - Manual (Page 47)

Menu Descriptions
6400 4
w w w . p a r r i n s t . c o m 45
User Defined Buttons
Combine Det. Reports: Pressing this key com-
bines all determination reports into a single
file named /tmp/bigdetfile.txt.
Combine Std. Reports: Pressing this key com-
bines all determination reports into a single
file named /tmp/bigstdfile.txt.
Logged Data to SD: Pressing this key copies
the log file to an SD memory card inserted into
the back of the controller.
Rinse Bomb: This key initiates a bomb rinse. This
function can be used to clean out the cylinder in the
event a sample is spilled inside the cylinder.
Instrument Monitor: This key accesses its sub-menu
screen which provides a summary of most of the
important instrument parameters. This screen is
used to detail the course of a test or to observe the
heating/cooling performance of the calorimeter.
View System Info: Press this key to display a screen
with current operating system information/statistics
such as:
• Processes and their associated PIDs
• Memory
• Mass Storage
• Network
• Press the Print key to print this information.
View Instrument Log: Press this key to display
a screen with contents of the /tmp/instlog file. It
contains a sequential log of the instrument’s pro-
cessing. Press the Print key to print this log.
I/O Diagnostics:
Press this key to display the I/O Diagnostics sub-
menu, which allows the user to manipulate digital
outputs for troubleshooting. The I/O Diagnostics
screen is used to display the digital outputs at a
basic level for troubleshooting. Both the bucket
and jacket temperatures are also displayed on this
screen. Any output can be selected using the left
and right arrow keys. The selected output is turned
ON (1) or OFF (0) using the 1 and 0 keys. Prior
to entering the Diagnostics Menu, the controller
stores the present state of the outputs. This state is
restored when you exit this screen. Digital outputs
cannot be manipulated while a test is in progress.