Pitney Bowes DM1100 - Manual (Page 164)

9 • Maintaining and Updating
9 - 10 SV62146 Rev. D
This exposes the print-
head cover.
6. Grasp the printhead
cover and pull as shown
here.
7. Grasp the printhead
stand-off and lift the
printhead up and out.
8. Discard the old print-
head.
9. Locate the new print-
head and remove the
protective cover.
10. Install the new printhead
in the printhead slot.
11. Close the printhead
cover and push the print-
head latch back until you
hear it click into place.
12. Close the main cover.
Printhead Cover
Printhead Standoff