Pitney Bowes DM1100 - Manual (Page 177)

DM1100™ Digital Mailing System Operating Guide
SV62146 Rev. D 10-11
Gummed tape is not
wet.
(continued) Brush not out far enough to reach
tape. 1. Move the tape lever to the up position.
2. Move the brush lever to the right to pull the
brush mechanism forward.
3. Remove the brush.
4. Pull out brush and readjust to longer length.
5. Reinstall brush and release holder to return
original position.
Valve in moistener bottle cap is
not working. Call the Help Desk. Refer to the Pitney Bowes
Contact Information List in the guide for more
information
Low E-Z Seal® Sealing Solution
message is not working. Call the Help Desk. Refer to the Pitney Bowes
Contact Information List in the guide for more
information
Tape Feeding Problems
Description Possible Causes Solution
Tape
Lever
Brush Lever