Pitney Bowes DM1100 - Manual (Page 83)

DM1100™ Digital Mailing System Operating Guide
SV62146 Rev. D 5-17
Phone/Network
Set Up: Network
Settings This option allows you to modify individual phone connection parameters.
1. Press the Menu key on the control center. Select Set Up from the main
screen, then select Phone/Network Set Up.
2. Select Network Settings. The "Network Set Up" screen appears and
displays the following options:
•
Distributor Parameters
• Mailing System Network Settings
3. If you select Distributor Parameters, the system displays the following
connection parameters:
•
Global Account & User Id
• Global Password
• ANI/LCZ Server IP
• ANI/LCZ Server Port #
• Primary DNS Server
• Secondary DNS Server
• Distributor URL
• Backup Data Center URL
4. If you select Mailing System Network Settings, the system displays
the following options.
•
Get IP Address
• IP Address
• Subnet Mask
• Default Gateway
• MAC Address (you cannot modify this)
5. Select the parameter you want to edit and make the changes.
6. Press Enter when complete.
Phone/Network
Set Up: Remote
PC Refill This option is available only on systems that have the optional Remote
Refill feature installed.
Use this option to turn the Remote PC Refill feature on or off.
1. Press the Menu key on the control center. Select Set Up from the main
screen, then select Phone/Network Set Up.
2. If necessary, press the down arrow key and select Remote PC Refill to
toggle this option on or off.
3. The mailing system must restart in order for the change to take effect.
The system will restart automatically; however, you can select OK,
restart now to expedite the process.
CAUTION: Changing these parameters may result in errors
when trying to contact Pitney Bowes. Contact your Pitney Bowes
representative or call the Help Desk if you are not sure. Refer to
the
Pitney Bowes Contact Information List at the front of this
guide for the phone number.
NOTE: Once you select this option, the system will restart.