Rocktron Taboo Twin - Manual (Page 36)

33
FLANGER Function
Parameter Description
FLANGER I/O The FLANGER I/O parameter determines whether the Flanger is active or bypassed for the
current preset.
LEVEL 1 The LEVEL 1 parameter determines the volume of Voice 1 relative to Voice 2.
Tip: Keep the settings of these levels high and use the DIR/EFF mix parameter in the Mixer
function to control the overall amount of flanged signal.
PAN 1 The PAN 1 parameter allows you to pan Voice 1 to the left or right channel.
DEPTH 1 The DEPTH 1 parameter adjusts the amount of modulation of Voice 1. Lower DEPTH settings
produce more subtle effects, while higher settings will result in a more drastic effect.
RATE 1 The RATE 1 parameter determines the speed at which Voice 1 is modulated.
LEVEL 2 The LEVEL 2 parameter determines the volume of Voice 2 relative to Voice 1.
PAN 2 The PAN 2 parameter allows you to pan Voice 2 to the left or right channel.
DEPTH 2 The DEPTH 2 parameter adjusts the amount of modulation of Voice 2. Lower DEPTH settings
produce more subtle effects, while higher settings will result in a more drastic effect.
RATE 2 The RATE 2 parameter determines the speed at which Voice 2 is modulated.
REGEN The REGENERATION parameter determines how much of the the delayed output signal is fed
back into the input. More regeneration produces a more pronounced "jet airplane" type of
effect.
Flanging involves splitting the input signal into at least two individual delayed signals (Voice 1 and Voice 2), then
modulating these delayed signals so that, when summed back with the direct signal, phase cancellations will occur
at some frequencies while peaks in the response will occur at others.
The P ARAMETER S ELECT control will allow you to access the following FLANGER parameters: