Rocktron Taboo Twin - Manual (Page 52)

49
Step 8 Turn the P ARAMETER S ELECT control one step clockwise to display the Upper Limit parameter
(for PARA1).
ULIM C1 XXX
Step 9 Use the P
ARAMETER
A
DJUST
control to choose the highest value that the parameter is not to
exceed through MIDI control changes.
ULIM C1 -2
Step 12
Step 13
Step 10
Step 11
Use the P
ARAMETER
A
DJUST
control to select the lowest value which the parameter is not to
fall below through MIDI control changes.
• Selecting a lower limit value that is greater than the upper limit value will invert the
response of the controller—i.e. the toe position of the expression controller will pro-
vide the minimum value, while the heel position will provide the maximum value.
• Steps 1-13 are repeated seven times for a total of eight controllers. To exit Controller
Assign at any time, press the M
ENU
button. Only changes that have been stored will be
saved after exiting the Controller Assign function.
After selecting a value for the lower limit, press the S
TORE
button to save it. "STORED" will
flash briefly on the display.
LLIM C1 - ∞
Turn the P
ARAMETER
S
ELECT
control one step clockwise to access the Lower Limit parameter
(for PARA1).
After selecting a value for the upper limit, press the S
TORE
button to save it. "STORED" will
flash briefly on the display.
STORED
LLIM C1 -12
STORED
G
Notes