Rocktron Taboo Twin - Manual (Page 56)

53
Program Changes
Step 1 With the M ENU button lit, turn the F UNCTION S ELECT control clockwise until the Taboo Twin
displays "PROGRAM CHANGES".
Program Changes allow for different MIDI program numbers to be assigned to Taboo Twin preset numbers. For
example, MIDI program #58 can be mapped to Taboo Twin preset #34. Then, when program #58 is selected from a
MIDI transmitting device (such as a Rocktron
All Access foot controller), preset #34 will be recalled on the Taboo
Twin.
The Program Changes map table is shipped from Rocktron at a one-to-one correspondance (i.e. MIDI program
#1 is mapped to Taboo Twin preset #1, 2 to 2, 3 to 3, etc.).
3,7
Step 2 Turn the P ARAMETER S ELECT control one step clockwise to display the current Program Change
On/Map/Off status.
PROGRAM CHANGES
PROG CHANGES ON
Program Changes status options
ON - Execute MIDI program changes as received by a MIDI controller
MAP - Use mapping table when a program change is received
OFF - Do not execute MIDI program changes
Step 3 Turn the P
ARAMETER
A
DJUST
control to select the desired Program Changes status setting.
PROG CHANGES MAP
Step 4 Press the S
TORE
button to save the status selection. "STORED" will flash briefly on the
display.
STORED
4,8 1 2,5,6