Rocktron Taboo Twin - Manual (Page 45)

42
Changing preset parameters not provided by Instant Access controls
3 2
Step 2 With the M
ENU
button lit, turn the F
UNCTION
S
ELECT
control to select the function heading which
contains the parameter(s) you wish to change.
**** REVERB ****
Step 1 Enter the Menu edit mode by pressing the M
ENU
button. The Menu button will be lit at this
time.
MENU
4 1,5
Step 3
Turn the P
ARAMETER
S
ELECT
control to the specific parameter you wish to change.
REV DECAY 59
Step 4
Turn the P
ARAMETER
A
DJUST
control to alter the parameter value. The LED above the S
TORE
button will light, indicating that the preset has had a parameter altered from its stored value.
REV DECAY 32
Step 5 After the desired parameters have been edited, the preset can be stored into memory as
described in the next section. Otherwise, the Menu edit mode can be exited by pressing the
M
ENU
button.