Rocktron Taboo Twin - Manual (Page 71)

68
Step 3 Turn the F UNCTION S ELECT control clockwise to "REMOTE CONTROL".
REMOTE CONTROL
Step 4 Turn the P ARAMETER S ELECT control one step clockwise to display "REMOTE".
REMOTE OFF
Step 5 Turn the P ARAMETER A DJUST control to select "ON".
REMOTE ON
Step 6 If the Taboo Twin titles are to be displayed on the All Access, turn the P
ARAMETER
S
ELECT
control to "TITLE XFER".
TITLE XFER OFF
Step 7 Turn the P ARAMETER A DJUST control to "ON" to enable title transfers from the Taboo Twin to
the All Access display.
TITLE XFER ON
To set up the All Access for remote operation, perform these steps from the All Access SETUP program:
(See the All Access user's manual for detailed information on editing the All Access)
Step 8 Set the Operating Mode to "REMOTE".
Set the Bank Size to "10".
Reinitialize only the controller information for the instant access switches and pedals using a
code of "231".
If the preset titles from the Taboo Twin are to be displayed on the All Access automatically,
set the Remote Title Number to match the Unit ID Number parameter on the Taboo Twin.
Step 9
Step 10
Step 11