Rocktron Taboo Twin - Manual (Page 70)

67
Using the Taboo Twin with a Rocktron All Access ® in REMOTE mode
A Rocktron All Access MIDI footswitch can act as a dedicated remote control for the Taboo Twin—allowing
direct access to specific Taboo Twin features and parameters from the footswitch at any time.
To use an All Access footswitch as a dedicated remote, connect the M
IDI
O
UT
of the All
Access to the R EMOTE jack of the Taboo Twin using a 7-pin MIDI cable, as shown below.
Step 2 Reinitialize the controller assignments as shown earlier in this section under the heading
"Restoring the Taboo Twin Controller Assignments". This will match up the Taboo Twin's
controller assignments to the All Access. A code of "221" must be entered to initialize only the
controller information.
ALL RESTORE 221
To set up the Taboo Twin for remote operation, do the following:
Step 1