Rocktron Taboo Twin - Manual (Page 65)

62
If errors occur during transmission, the unit will display "RECEIVE ERROR" for transmission
errors and "XMEM ERROR" for internal hardware errors. Errors occurring in transmission
does not indicate that all of the received data is corrupted. Only the transmission string where
the error occurred is corrupted.
When receiving a Bulk Load, it is important that the data loaded to the Taboo
Twin is not transmitted faster than it was originally dumped from the Taboo
Twin. If information is sent too fast to the Taboo Twin, an error will occur.
When dumping information from a data storage device, such as an Alesis Data
Disk, it is necessary to perform the dump in
sequence mode rather than sysx
mode. Sequence mode will dump the information back to the Taboo Twin at
the same rate as it was received from the Taboo Twin. The Taboo Twin can
receive a data dump at about 65Hz (or about 1 byte every 15 milliseconds).
G
Important
Note