Rocktron Taboo Twin - Manual (Page 46)

43
Step 1 While viewing a function or parameter title, press the S
TORE
button to initiate the store proce-
dure. The display will now alternate between the current destination preset number and title
and "STORE AT PRESET".
Storing changed preset parameters
1,3,4 2
29 PRESET TITLE
Step 2 Turn the P RESET control to select the desired preset number to store the new parameter values
into. (If you wish to store the new parameter values into the current preset number, this step is
not necessary.) The display will now alternate between the new preset number and "STORE
AT PRESET".
STORE AT PRESET
Note: Turning the F UNCTION S ELECT control at this time will cancel the store procedure.
STORE AT PRESET
57 PRESET TITLE
З
Ж
Г
К
З
Ж
Г
К
Step 3 Press the S
TORE
button a second time to store the new values into the selected preset number.
The display will briefly flash "STORED" before displaying the new preset number and title.
(Note: Turning either the F
UNCTION S ELECT or P ARAMETER S ELECT controls before completing
this step will cancel the store procedure.)
STORED
If the store procedure is exited before completing Step 3 (by pressing the Menu button),
all edited parameter values will still remain active until another preset has been se-
lected. When saving altered parameters, make sure the display flashed “STORED”
before exiting the store procedure.
G
Note