Enhanced power magazine (epm) changing the epm – Taser X3 User Manual
Page 11
11
flashlight. The EPM will deplete faster in colder weather than warm weather. Likewise, the EPM will deplete
faster with the flashlight active.
1
Remove the protective label from the EPM contacts before installing the EPM battery in the X3 ECD.
2
Inspect the contacts to ensure the adhesive residue has been removed.
Contacts
For more information on installing the EPM, see the "Changing the EPM" section in this manual.
Enhanced Power Magazine (EPM)
Changing the EPM
1
Point the ECD in a safe direction.
2
Ensure the CAM-Lock Safety is in the down (SAFE) position.
3
Remove the Smart Cartridges. See the "Unloading" section in this manual for more information.
4
To unload the EPM power pack:
4a
Press and hold the EPM lock button located on the back of the EPM.
4b
Press the release buttons located on both sides of the EPM.
4c
Pull firmly in a downward motion on the EPM to remove it from the ECD.
EPM Lock Button
Release Button
Release Button
4d
Wait approximately five seconds.
Chapter 3
Features & Operation