Taser X3 - Manual (Page 34)

34
SIGHTING MENU
FLASHLIGHT
SINGLE
LASER
AUTOMATIC
FLASHLIGHT AUTOMATIC
SIGHTING MENU
FLASHLIGHT
SINGLE
LASER
OFF FLASHLIGHT OFF
7 Press the selector switch to return to the MAIN MENU.
8 You can set the other options. If you are done configuring the X3 ECD, press the selector switch again to exit.
Configuring The X3 ECD and Viewing the System Status
Configuring the Top/Bottom Lasers
1 Point the X3 ECD in a safe direction.
2 Shift the CAM-Lock safety to the down (SAFE) position.
3 Remove the Smart Cartridges from the X3 ECD. See the "Unloading" section in this manual for more
information.
4 Press and hold the selector switch until the MAIN MENU displays. The SIGHTING option should already be
selected.
MAIN MENU
SIGHTING
OPTIONS
LANGUAGE
INFO
SYSTEM
5 Press the left ARC switch to open the SIGHTING MENU.
SIGHTING MENU
FLASHLIGHT
DUAL 2
LASER
ON
6 Press the right ARC switch.
7 Press the left ARC switch to select the option you want to use.
SIGHTING MENU
FLASHLIGHT
OFF
LASER
ON OFF Both Lasers are OFF
Chapter 3 Features & Operation