Waldorf Blofeld Keyboard - Manual (Page 24)

Multi Mode
Blofeld User´s Manual 24
Multi Mode
The Waldorf Blofeld offers a 16 part Multi mode. As soon
as you want to do multi track recordings in a studio, you
should start to use Multi parts. Each sound in a Multi
setup based on a socalled Part.
☞
Selection of the Multi Mode:
• Press Shift + Sound/Multi to toggle between
the Play Sound Mode and the Multi Mode. In
Multi Mode the upper display row shows you
the number of the current selected part.
In addition to 1024 sound programs, Blofeld now offers
128 Multi sets.
☞
Selection of the Multi programs:
• Use the Selection dial c to select the desired
Multi Program.
Multimode Parameter
Multi Volume 0…127
Multi Volume sets the overall volume for the selected
Multi program. It affects all Instruments of the Multi
program, so if you would set Multi Volume to 0, you
won´t hear anything.
w
Multi Volume is used to set several Multi programs
to similar output levels, especially in live
situations. While recording in a studio, you should
set Multi Volume to 127 to get the highest possible
Signal-to-Noise ratio.
Tempo 40…300
Tempo sets the global tempo for all instruments in the
selected Multi program. It affects all arpeggiators, all LFO
and all Effects and overrides the corresponding sound
tempo settings.
Multi Part Parameter
Before you can adjust the sound parameters of a particular
Part, you have to select it. The Multi mode of the Blofeld
offers 16 Parts that can be played at a time via MIDI.
☞
To select a Part:
1. Press and hold the Play button, while you
choose the desired parts with the Selection