Waldorf Blofeld Keyboard User Manual
Page 55
Sound Parameter
55
Blofeld User´s Manual
parameter affects the envelope types ADS1DS2R, One
Shot, Loop S1S2 and Loop All only.
Amp Envelope
The following parameters are valid for the amplifier
envelope.
Trigger
normal/ single
Determines the triggering of the Amplifier Envelope.
•
normal means that every Note starts the amplifier
envelope of its own voice.
•
single means that the envelopes of all voices of a
selected program behave like a single envelope.
This common envelope starts as soon as the first
note is played. The sustain level remains until the
last note is released. Afterwards the release phase
is active.
This setting is only active as long as the
Parameter Allocation is set to mono. Otherwise
the envelope behaves as though set to normal.
Mode
ADSR / ADS1DS2R / One Shot / Loop S1S2 /
Loop All
Switches between the various envelope types. Please refer
to the Appendix for detailled explaination of all the types.
w
The standard envelope parameter Attack, Decay,
Sustain
and Release are accessable directly via the
parameter controls.
Allocation
Poly/ Mono
This parameter is similar to the Allocation parameter in
the Oscillator Edit Menu. Please refer to page 34.
w
When mono is selected and you have set up a
decaying volume envelope for the selected Sound,
you might not hear anything after playing several
notes because of the envelopes decaying to 0.
Attack Level
0...127
Controls the level at each the Attack phase ends and the
Decay
phase starts. This parameter affects the envelope
types ADS1DS2R, One Shot, Loop S1S2 and Loop All
only.
Decay 2
0...127
Determines the decay rate or amount of time it takes for a
signal to reach the Sustain 2 level. This parameter affects
the envelope types ADS1DS2R, One Shot, Loop S1S2 and
Loop All only.