Waldorf Blofeld Keyboard - Manual (Page 57)

Sound Parameter
57 Blofeld User´s Manual
Decay 2 0...127
Determines the decay rate or amount of time it takes for a
signal to reach the Sustain 2 level. This parameter affects
the envelope types ADS1DS2R, One Shot, Loop S1S2 and
Loop All only.
Sustain 2 0...127
Sets the second Sustain level. As soon as this level is
reached, the loop starts by using the first Decay rate to go
to the first Sustain level. This parameter affects the
envelope types ADS1DS2R, One Shot, Loop S1S2 and
Loop All only.
Release 0...127
Once the note is released, the release phase begins.
During this phase, the envelope fades to zero at the rate
determined by the Release value.
Parameter Control of the LFOs
In addition to the main oscillators, the Blofeld is equipped
with three low frequency oscillators (LFO) that can be
used for modulation purposes. Each LFO generates a
periodic waveform with adjustable frequency and shape.
w
Only LFO1 and LFO2 can be edited via the
Parameter Controls. LFO 3 is completely accessable
through the LFO Edit Menu.
Shape 1 Sine/ Triangle/ Square/ Saw/ Random/ S&H
Sets the type of waveform generated by LFO 1. The
following picture shows the available shapes:
• The Sine shape is best suited for oscillator FM or
pan modulations.
• The Triangle shape is perfect for smooth pitch,
filter or volume modulations.
• The Square shape can be interesting for hard pan
modulations or special effects.
Square
S&H Random
Triangle
Sawtooth
Sine