Waldorf Blofeld Keyboard - Manual (Page 61)

Sound Parameter
61 Blofeld User´s Manual
Modulation Matrix Edit Menu
To access the modulation Matrix Edit Menu press the
Modulation button shortly (if Auto Edit is set to on) or for
some time (if Auto Edit is set to off). Use the Selection dial
to scroll through the corresponding menu pages. The
name of the page is shown in the top of the display.
✻ Decide by yourself if you want to edit the
modulations via the Parameter Controls or via the
Modulation Matrix Edit Menu – the result is always
the same.
Source see table Modulation Sources
Defines the modulation source.
Destination see table Modulation Destinations
Defines the modulation destination.
Amount -64…+63
See Amount above
Modifier 1...4
Modifiers allow you to apply mathematical functions on
modulation signals. Depending on the function type
selected, calculation will affect two source signals or a
source signal and a constant parameter. You can use up to
four independent modifier units. The result of each
operation is not directly audible, but is used as input
source for the Standard Modulation Matrix. Moreover,
you can use it as source for yet another modifying
process.
The parameter for the modifiers can be found after the
pages of the Modulation slots. Please select these pages
with the Selection Dial an.
Source A see table Modulation Sources
Selects the first source signal used for the calculation.
Source B const / see table Modulation Sources
Selects the second source signal when two sources are
required for the calculation. See description of modifier
functions for further details. The possible settings are the
same as for Source A with one exception: “off” is
replaced by “constant” meaning that the calculation is
performed with a constant value that you can set up with
the Constant parameter.