Waldorf Blofeld Keyboard - Manual (Page 58)

Sound Parameter
Blofeld User´s Manual 58
• The Sawtooth shape can generate interesting filter
or volume changes. If you need a modulation with
inverted slope, just apply the Sawtooth shape with
negative amount.
•
The Random shape generates random values and
glides to them linearly.
• S&H (Sample & Hold) samples a random value
and holds it until the next value is generated. If
Speed
is set to 0, a random value is generated on
each new note.
Speed 1 0...127 or 1280 bars...1/48
Determines the frequency of LFO 1. At low values, it
might take several minutes for the LFO to perform a
complete cycle while higher values are in the audible
range. Very high values are scaled in semitone steps. With
LFO Keytrack
set to 100%, a Speed setting of 122
delivers an 8’ LFO oscillation. 16’ oscillation can
therefore be generated with a Speed setting of 110, and
so on.
When the LFO Clocked parameter is set to On, you can
adjust the Speed in musical values. The lowest possible
value is 1280 bars, meaning that a complete LFO cycle
would need 1280 bars.
Shape 2 Sine/ Triangle/ Square/ Saw/ Random/ S&H
See Shape 1.
Speed 2 0...127 or 1280 bars...1/48
See Speed 1
LFO Edit Menu
To access the LFO Edit Menu press the Modulation button
shortly (if Auto Edit is set to on) or for some time (if Auto
Edit is set to off). Use the Selection dial to scroll through
the corresponding menu pages. The name of the page is
shown in the top of the display.
LFO 1, 2 and 3
The following parameter are valid for all LFO which offers
the same parameters.
Shape Sine/ Triangle/ Square/ Saw/ Random/ S&H
See Shape 1.
Speed 0...127 or 1280 bars...1/48
See Speed 1.