Waldorf Blofeld Keyboard - Manual (Page 54)

Sound Parameter
Blofeld User´s Manual 54
Envelopes Edit Menu
To access the Envelope Edit Menu press the Modulation
button shortly (if Auto Edit is set to on) or for some time (if
Auto Edit is set to off). Use the Selection dial to scroll
through the corresponding menu pages. The name of the
page is shown in the top of the display.
Filter Envelope
The following parameters are valid for the filter envelope.
Trigger normal/ single
Determines the triggering of the Filter Envelope.
• normal means that every Note starts the filter
envelope of its own voice.
• single means that the envelopes of all voices of a
selected program behave like a single envelope.
This common envelope starts as soon as the first
note is played. The sustain level remains until the
last note is released. Afterwards the release phase
is active.
single is only active in monophonic
voice-mode.
Mode ADSR / ADS1DS2R / One Shot / Loop S1S2 /
Loop All
Switches between the various envelope types. Please refer
to the Appendix for detailled explaination of all the types.
w
The standard envelope parameter Attack, Decay,
Sustain
and Release are accessable directly via the
parameter controls.
Attack Level 0...127
Controls the level at each the Attack phase ends and the
Decay
phase starts. This parameter affects the envelope
types ADS1DS2R, One Shot, Loop S1S2 and Loop All
only.
Decay 2 0...127
Determines the decay rate or amount of time it takes for a
signal to reach the Sustain 2 level. This parameter affects
the envelope types ADS1DS2R, One Shot, Loop S1S2 and
Loop All only.
Sustain 2 0...127
Sets the second Sustain level. As soon as this level is
reached, the envelope goes into the Release phase. This