Pilz PSS SB TESTER D - Manual (Page 13)

Operating Manual: PSS SB TESTER 4-3
Setting the contrast
• Press F2 in the “Start” window.
• The “Settings” window opens. Use the arrow keys to move the cursor to
the symbol for “Contrast” and press VAL.
• Now you can use the “left” and “right” arrow keys to increase or reduce
the display’s contrast.
• Press VAL to save the setting.
The current setting is saved. A message confirms that the setting has been
saved. The “Settings” window is then displayed again. You can return to
the “Start” window by pressing ESC.
The contrast setting is stored in a memory that is supplied by the battery. If
the battery is removed, the contents of the memory will be retained for 10
minutes. If it takes longer for the battery to be replaced, the contents of the
memory will be lost.
Switching the backlight on/off
• Press F2 in the “Start” window.
• The “Settings” window opens. Use the arrow keys to move the cursor to
the symbol for “Backlight” and press VAL.
• Two symbols will appear.
If you wish to switch the backlight on, use the arrow keys to highlight the
symbol.
If you wish to switch the backlight off, highlight the symbol.
• Press VAL to save the setting.
The current setting is saved. A message confirms that the setting has been
saved. The “Settings” window is then displayed again. You can return to
the “Start” window by pressing ESC.