Introduction, Validity of documentation, Overview of documentation – Pilz PSS SB TESTER D User Manual
Page 5
Operating Manual: PSS SB TESTER
1-1
This operating manual is intended to give users all the information they
need to use the PSS SB TESTER.
To fully understand this manual you will need to be conversant with the
information found in the general documentation for the SafetyBUS p PSS-
range. In particular you should read the SafetyBUS p System Description
and SafetyBUS p Installation Manual.
This documentation is intended for instruction and should be retained for
future reference.
Validity of documentation
This documentation is valid for the PSS SB TESTER from Version 2.0.
It is valid until new documentation is published. The latest documentation is
always enclosed with the unit.
Overview of documentation
The manual is divided into the following chapters:
1 Introduction
The introduction is designed to familiarise you with the contents,
structure and specific order of this manual.
2 Overview
This chapter provides a brief overview of the unit’s most important
features and its application range.
3 Safety
This chapter must be read as it contains important information on
safety regulations and intended use.
4 Operation
This chapter contains detailed information on how to operate the unit.
5 Tests/Measurements
This chapter describes the separate tests than can be performed
using the PSS SB TESTER.
6 Software
This chapter describes the software used to read the test results.
Introduction