Pilz PSS SB TESTER D - Manual (Page 9)

Operating Manual: PSS SB TESTER 3-1
Safety
Intended use
The PSS SB TESTER is designed for use in SafetyBUS p networks.
Specific data for the PSS SB TESTER is given in the chapter entitled
“Technical Details”. Use of the device outside the specifications given here
will be deemed as improper use.
Any component, technical or electrical modifications carried out will be
deemed as improper use.
Use of the PSS SB TESTER outside the areas described in this manual
will be deemed as improper use.
Intended use includes following the information in this manual.
The PSS SB TESTER is not a safety-related device.
EMCD
The device is designed for use in an industrial environment. Interference
may occur if used within a domestic environment.
Warranty and liability
All claims to warranty and liability will be rendered invalid if
• The module was used contrary to the purpose for which it was intended
• Damage can be attributed to not having followed the guidelines in the
manual
• Operating personnel are not suitably qualified.
• The housing was opened
• Any type of modification has been made (e.g. exchanging components
on the PCB boards, soldering work etc.).