Altera Stratix IV GT 100G - Manual (Page 27)

Chapter 6: Board Test System 6–5
Using the Board Test System
October 2010 Altera Corporation Stratix IV GT 100G Development Kit User Guide
The Config Tab
The Config tab shows configuration information for the 100G development board.
Figure 6–3 shows the Config tab.
The following sections describe the controls on the Config tab.
Board Information
The Board information controls display static information about your board.
■ Name —Indicates the official name of the board, given by the Board Test System.
■ Part number —Indicates the part number of the board.
■ Serial number —Indicates the serial number of the board.
■ Factory test version —Indicates the version of the Board Test System currently
running on the board.
■ MAC —Indicates the MAC address of the board.
Figure 6–3. The Config Tab