The gpio tab, Jtag chain –7 sopc builder memory map –7, The gpio tab –7 – Altera Stratix IV GT 100G User Manual
Page 29: Character lcd –7
Chapter 6: Board Test System
6–7
Using the Board Test System
October 2010
Altera Corporation
Stratix IV GT 100G Development Kit User Guide
JTAG Chain
The JTAG chain control shows all the devices currently in the JTAG chain. The
Stratix IV GT device is always the first device in the chain.
1
The installed jumper for JTAG_EN (J41) includes the MAX II device in the JTAG
chain.
SOPC Builder Memory Map
Static display
The GPIO Tab
The GPIO tab allows you to interact with all the general purpose user I/O
components on your board.
shows the GPIO tab.
The following sections describe the controls on the GPIO tab.
Character LCD
The Character LCD controls allow you to display text strings on the character LCD on
your board. Type text in the text boxes and then click Display.
Figure 6–4. The GPIO Tab