AVUE ADR9600HE – 8/16 Channel Professional 960H/700 TVL Real Time 1U DVR - Manual (Page 11)

DVR User Manual
6
Item Name Description
1 Audio in 4-ch audio inputs
2 DC 12V Power input
3 Alarm out 1-ch relay output. Connect to external alarm.
4 GND Grounding
5 Alarm in Connect to external sensor1
6 Audio out Audio output, connect to the sound box
7 CVBS port CVBS video signal output
8 Spot
Connect to monitor as an AUX output channel by channel. Video
would be displayed without OSD.
9 RS485 Connect to keyboard or speed dome
10 Video in Video inputs
11 HDMI port Connect to high-definition display device
12 USB port
To connect external USB devices like USB flash, USB HDD for
backup or update firmware; or connect to USB mouse
13 LAN Network port
14 VGA port VGA output, connect to monitor
15 Fan For cooling the device
2.4 Remote Controller
It uses two AAA size batteries.
Step 1: Open the battery cover of the remote controller.
Step 2: Place batteries. Please take care the polarity (+ and -).
Step 3: Replace the battery cover.
Key points to check in case the remote doesn’t work.
1. Check batteries polarity.
2. Check the remaining charge in the batteries.
3. Check IR controller sensor for any masking.
4. Check the ID of the remote with respect to the DVR.
If it still doesn't work, please change a new remote controller to try, or contact your dealers.
The interface of remote controller is shown in Fig 2-8 Remote Controller..
Note: Please press P.T.Z button to enter into PTZ setting mode and then choose a
channel and press P.T.Z button again to hide the P.T.Z control panel prior to enabling
preset, cruise, track, wiper or light button.