AVUE ADR9600HE – 8/16 Channel Professional 960H/700 TVL Real Time 1U DVR - Manual (Page 35)

DVR User Manual
30
Fig 4-28 Network Configuration-Server
Step 2: Check the IP address and port of the transfer media server in the ECMS. The default
server port for auto report is 2009. If it is modified, please enter into the transfer media
interface to check.
Step 3: Enable the auto report in the ECMS when adding a new device. Then input the
remaining information of the device in the ECMS. After that, the system will auto allot a
Device ID. Please check it in the ECMS.
Step 4: Input the above-mentioned server IP, server port and device ID in the server interface.
Then click “Apply” button to save the setting. Now, the ECMS system will automatically
connect this device.
4.6.5 Other Settings
If your DVR is set to use PPPoE as its default network connection, you may setup DDNS to
be used in connection. The setting steps are as follows:
Step 1: Enable DDNS server.
Step 2: Select DDNS server.
Step 3: Enter user name, password and host domain name of the registered website.
Step 4: Click “Test” button to test the effectiveness of the relevant information.
Step 5: Click “Apply” button to save the setting.
Fig 4-29 network Configuration-Other Settings