AVUE ADR9600HE – 8/16 Channel Professional 960H/700 TVL Real Time 1U DVR - Manual (Page 19)

DVR User Manual
14
there is no any operation within the setting period, the device will auto logout and return to
login interface.
Show Wizard: If selected, the GUI would launch the startup wizard on every boot, allowing
the user to do basic setup.
No Image When Logout: If selected, there will be no image showing when logging out.
4.1.2 Time & Date
Step 1: Enter into MenuSetupBasic Date & Time interface. Refer to Fig 4-4:
Fig 4-4 Basic Configuration-Date & Time
Step 2: Set the date format, time format, time zone in this interface; checkmark “sync time
with NTP server” to refresh NTP server date. You can also adjust system date manually.
Step 3: Click “Apply” button to save the setting.
4.1.3 DST
Step 1: Enter into MenuSetupBasic DST interface. Refer to Fig 4-5:
Fig 4-5 Basic Configuration-DST
Step 2: In this interface, enable daylight saving time, time offset, mode, start & end
month/week/date, etc.
Step 3: Click “Apply” button to save the setting.