BINDER BF 53 - Manual (Page 11)

BF (E1) 02/2015 page 11/51
Symbol on the type plate
Information
CE conformity marking
Electrical and electronic equipment manufactured / placed on the
market in the EC after 13 August 2005 and to be disposed of in a
separate collection according to directive 2002/96/EC on waste
electrical and electronic equipment (WEEE).
or
The equipment is certified in the GOST R certification system of
GOSTSTANDARD Russia.
The equipment is certified according to Customs Union Technical
Regulation (CU TR) for Russia, Belarus and Kazakhstan
(BF-UL only)
The equipment is certified by Underwriters Laboratories Inc. ®
according to standards UL 61010A-1, UL 61010A-2-10, CSA C22.2
No. 1010.1-92, and CSA C22.2 No. 1010.2.010-94.
1.5 General safety instructions on installing and operating the incubator with
forced convection BF
With regard to operating the incubator with forced convection BF and to the installation location, please
observe the guideline BGI/GUV-I 850-0 on safe working in laboratories (formerly BGR/GUV-R 120 or ZH
1/119 laboratory guidelines issued by the employers’ liability insurance association).
BINDER GmbH is only responsible for the safety features of the unit provided skilled electricians or
qualified personnel authorized by BINDER perform all maintenance and repair, and if components relating
to chamber safety are replaced in the event of failure with original spare parts.
To operate the unit, use only original BINDER accessories or accessories from third-party suppliers
authorized by BINDER. The user is responsible for any risk caused by using unauthorized accessories.
CAUTION
Danger of overheating.
Damage to the unit.
∅
Do not install the unit in unventilated recesses.
 Ensure sufficient ventilation for dispersal of the heat.
Do not operate the incubator with forced convection BF in hazardous locations.
DANGER
Explosion hazard.
Danger of death.
∅
Do NOT operate the unit in potentially explosive areas.
 KEEP explosive dust or air-solvent mixtures AWAY from the unit.