4 user level settings – BINDER BF 53 User Manual
Page 24
BF (E1) 02/2015
page 24/51
6.4 User level settings
By pressing down button
in normal display (actual value display) for 5 sec, you enter the user menu.
Settings in this menu affect controller operation.
User level overview
:
Press down button
for approx. 5 seconds
Select the
temperature unit (chap. 6.4.1)
Press
button
Ramp function (chap. 6.4.2)
Press
button
Setting the
unit address (chap. 6.4.3)
Press
button
Timer function (chap. 6.4.4)
Press
button
Setting the
interface mode and, if appropriate,
the
printer interval (chap. 6.4.5)
Figure 5: Press down
button for approx. 5
seconds
Press button
to return to normal display with display of the temperature set-point.
Or:
After approx. 30 seconds the controller automatically returns to normal display / actual value display.
All settings can be carried out independently (as described in the individual sections) or one after the other
during one single process.
The defined parameters are not deleted when the main power switch is turned off or in case
of power failure.