BIXOLON SRP-500 - Manual (Page 12)

Rev. 1.08 - 12 -
SRP-500
2. Connecting the cables
※ CAUTION
Before connecting the printer to the power supply, make sure that the voltage and power
specifications match the printer's requirements. Using an incorrect power supply can
cause serious damage to the printer.
2-1 Connect the AC adapter according to the following procedure
2-1-1 Make sure the printer is turned off.
2-1-2 Plug the AC adapter cable into the printer's power connector.
2-1-3 Plug the power cord into the outlet, and turn on the power.