CIRCUTOR CBS8 (Available until stocks) - Manual (Page 18)

----- Relay Station CBS-8 -------- --- Page No. 17
4.3.- Reset mode
This is used to reset those relays that have tripped.
The equipment checks the line whilst it is reset
mode
This mode will be entered by pressing the “RESET” button for 3 seconds
when the equipment is in normal mode.
A menu will appear on the screen to select the channel which is to be reset.
No tripped channels
Channel tripped
All channel reset
If no button is pressed for 30 seconds the equipment automatically goes into
normal mode without reconnecting any blocked relay
⇒ Buttons:
In Reset mode the functions of the buttons will be:
- RESET button: Ends RESET mode.
- MODE button: Allows the channel to be reset to be selected.
- SELECT button: Resets the selected channel.
ALL